300-510 Exam Dumps - PDF Questions and Testing Engine
300-510 Dumps - The Sure Way To Pass Exam
NEW QUESTION 52
Refer to the exhibit. How are packets directed through the data plane when SRv6 is implemented?
- A. The packet is encapsulated with a header and trailer encoding the ordered list of segments
- B. A stack of labels represents an ordered list of segments
- C. The MPLS data plane is used to push labels onto IGP routes
- D. An ordered list of segments is encoded in a routing extension header
Answer: D
Explanation:
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf
NEW QUESTION 53
An engineer is troubleshooting slow performance issues on a customer's network after the last multicast configuration change was applied on it While checking the running configuration on the router the engineer notices there are many ip igmp join-group commands applied on several interfaces of the router which caused the high CPU utilization usage. What action must the engineer take to solve this issue?
- A. Configure all router interfaces to be process-switched by increasing the query interval
- B. Remove ip igmp join-group command on all unnecessary interfaces
- C. Configure ip igmp static-group command on all interfaces
- D. Remove unnecessary members from the IGMP group
Answer: B
NEW QUESTION 54
Refer to the exhibits.
All links inside the network are configured at a default cost of one inside the fully converged OSPF domain.
Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?
- A. Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.
- B. Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.
- C. Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.
- D. Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process.
Answer: B
NEW QUESTION 55
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
- B. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- C. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- D. Router 2 uses router 1 as the next hop for 192.168.0.0/24
Answer: B
NEW QUESTION 56
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. weight
- B. MED
- C. origin
- D. local preference
Answer: B
NEW QUESTION 57
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- B. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- C. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
Answer: C
Explanation:
Reference:
html#wp1552800140
NEW QUESTION 58
Refer to the exhibit.
Which LSA type is indicated by this router output?
- A. type 1 LSA
- B. type 3 LSA
- C. type 4 LSA
- D. type 2 LSA
Answer: A
NEW QUESTION 59
Refer to the exhibit.
How are packets directed through the data plane when SRv6 is implemented?
- A. The packet is encapsulated with a header and trailer encoding the ordered list of segments
- B. A stack of labels represents an ordered list of segments
- C. The MPLS data plane is used to push labels onto IGP routes
- D. An ordered list of segments is encoded in a routing extension header
Answer: D
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf
NEW QUESTION 60
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network. Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)
Answer:
Explanation:
NEW QUESTION 61
Which statement about enabling segment routing for IGPs is true?
- A. Segment routing must first be enabled under then routing process and then globally
- B. Segment routing can be enabled only under the routing process
- C. Segment routing must first be enabled globally and then under the routing process
- D. Segment routing can be enabled only globally
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/seg_routing/configuration/xe-16-6/segrt-xe-16-6- book/sr-ospfv2-node-sid.html
NEW QUESTION 62
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 63 
Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
- B. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- C. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- D. Router 2 uses router 1 as the next hop for 192.168.0.0/24
Answer: B
NEW QUESTION 64
Refer to the exhibit.
Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?
- A. Router 2 must have a tunnel interface created with router 1 as the destination
- B. Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- C. Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1
- D. Router 1 must define an explicit path to router 2
Answer: C
NEW QUESTION 65
Refer to the exhibit.
A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 66 
Refer to the exhibit. Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- B. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- C. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
Answer: C
Explanation:
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/command/irg-cr-book/bgp-s1.html#wp1552800140
NEW QUESTION 67
Refer to the exhibit.
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
- A. The BGP session comes up between R1 and R2, but not between R1 and R3.
- B. The BGP session comes up between R1 and R2 and between R1 and R3.
- C. The BGP session does not come up between R1 and R2 and between R1 and R3.
- D. The BGP session comes up between R1 and R3, but not between R1 and R2.
Answer: B
NEW QUESTION 68
What is the purpose of a BGP confederation?
- A. It limits the number of routes a device receives from its peers, which reduces CPU load.
- B. It redirects traffic away from route reflectors, which reduces their operating load.
- C. It reduces the number of iBGP peers and increases stability.
- D. It improves service by increasing the number of simultaneous iBGP peering sessions.
Answer: C
NEW QUESTION 69 
Refer to the exhibit. After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?
- A. Routes that have originated through AS 65517 have the local preference set to 150.
- B. Routes that have passed through AS 65517 have the local preference set to 150.
- C. Routes directly attached to AS 65517 have the local preference set to 150.
- D. Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied.
Answer: B
NEW QUESTION 70
Refer to the exhibit
Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R2
- B. R5
- C. R3
- D. R4
Answer: A
NEW QUESTION 71
Refer to the exhibit.
An administrator is troubleshooting Internet access issues on a customer's network. After applying this ISIS configuration to R1, the administrator notices that it fails to redistribute the default route into IS-IS. After checking the connectivity between the ISIS router and the ISP router the engineer confirmed there is Layer 3 connectivity between them Which action should be taken to correct the problem?
- A. Add the default-information originate command to the configuration
- B. Configure the default route under any routing protocol other than IS-IS
- C. Configure R1 as a Layer 1 router
- D. Associate the default route with a VRF
Answer: A
NEW QUESTION 72
......
Pass Cisco 300-510 Exam Quickly With SurePassExams: https://dumpsninja.surepassexams.com/300-510-exam-bootcamp.html