NSE7_PBC-6.4 Free Certification Exam Material from SurePassExams with 30 Questions
Use Real NSE7_PBC-6.4 - 100% Cover Real Exam Questions
NEW QUESTION 17
Refer to the exhibit.
You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?
- A. You selected the incorrect resource group.
- B. You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.
- C. You selected the Bring Your Own License (BYOL) licensing mode.
- D. You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.
Answer: A
NEW QUESTION 18
Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)
- A. Destination port ranges
- B. Sequence number
- C. Source and destination IP ranges
- D. Source port ranges
- E. Action
Answer: A,D,E
NEW QUESTION 19
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)
- A. A multiple VPC deployment utilizing a transit VPC topology
- B. A multiple VPC deployment utilizing a transit gateway
- C. A single VPC deployment with multiple subnets
- D. A single VPC deployment with multiple subnets and a NAT gateway
Answer: A,C
Explanation:
Explanation/Reference: https://www.fortinet.com/content/dam/fortinet/assets/white-papers/wp-aws-reference- architecture.pdf
NEW QUESTION 20
An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?
- A. The worker node migrates the subnet to a different availability zone.
- B. The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node's private subnet interface.
- C. The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node's private subnet interface.
- D. The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.
Answer: A
NEW QUESTION 21
Refer to the exhibit.
Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Configure VNet peering between the hub and spokes.
- B. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- C. Configure VNet peering between the spokes only.
- D. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
Answer: A,B
NEW QUESTION 22
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?
- A. WAF, Shield, GuardDuty, S3, and DynamoDB.
- B. GuardDuty, CloudWatch, S3, and DynamoDB.
- C. Inspector, Shield, GuardDuty, S3, and DynamoDB.
- D. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
Answer: D
NEW QUESTION 23
Customer XYZ has an ExpressRoute connection from Microsoft Azure to a data center. They want to secure communication over ExpressRoute, and to install an in-line FortiGate to perform intrusion prevention system (IPS) and antivirus scanning.
Which three methods can the customer use to ensure that all traffic from the data center is sent through FortiGate over ExpressRoute? (Choose three.)
- A. Define a default route where the next hop IP is the FortiGate WAN interface
- B. Enable the redirect option in ExpressRoute to send data center traffic to a user-defined route table
- C. Configure a user-defined route table
- D. Install FortiGate in Azure and build a VPN tunnel to the data center over ExpressRoute
- E. Configure the gateway subnet as the subnet in the user-defined route table
Answer: A,B,E
NEW QUESTION 24
An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?
- A. They can create additional vNICs using the Cloud Shell.
- B. They cannot create and add additional vNICs to an existing FortiGate-VM.
- C. They can use the Compute Engine API Explorer.
- D. They can create additional vNICs in the UI console.
Answer: C
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/62d32ecf-687f-11ea-
9384-00505692583a/FortiOS-6.4-GCP_Cookbook.pdf
NEW QUESTION 25
Refer to the exhibit.
Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)
- A. The network interface of the active unit moves to itself
- B. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT- 0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
- C. 172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01
- D. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
Answer: B,C
NEW QUESTION 26
Your company deploys FortiGate VM devices in high availability (HA) (active-active) mode with Microsoft Azure load balancers using the Microsoft Azure ARM template. Your senior administrator instructs you to connect to one of the FortiGate devices and configure the necessary firewall rules. However, you are not sure now to obtain the correct public IP address of the deployed FortiGate VM and identify the access ports.
How do you obtain the public IP address of the FortiGate VM and identify the correct ports to access the device?
- A. In the configured load balancer, access the backend pools section.
- B. In the configured load balancer, access the inbound and outbound NAT rules section.
- C. In the configured load balancer, access the health probes section.
- D. In the configured load balancer, access the inbound NAT rules section.
Answer: B
NEW QUESTION 27
When configuring the FortiCASB policy, which three configuration options are available? (Choose three.)
- A. Data loss prevention policies
- B. Threat protection policies
- C. Antivirus policies
- D. Compliance policies
- E. Intrusion prevention policies
Answer: A,B,D
NEW QUESTION 28
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?
- A. Up to 10 Gbps per attachment
- B. Up to 1 Gbps per attachment
- C. Up to 50 Gbps per attachment
- D. Up to 1.25 Gbps per attachment
Answer: D
Explanation:
Explanation/Reference: https://d1.awsstatic.com/whitepapers/building-a-scalable-and-secure-multi-vpc-aws-network- infrastructure.pdf (5)
NEW QUESTION 29
Which two statements about Microsoft Azure network security groups are true? (Choose two.)
- A. Network security groups are stateless inbound and outbound rules used for traffic filtering.
- B. Network security groups can be applied to subnets only.
- C. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
- D. Network security groups can be applied to subnets and virtual network interfaces.
Answer: B,C
Explanation:
Explanation/Reference: https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview
NEW QUESTION 30
An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?
- A. Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.
- B. Create the ENI and attach it to FortiGate.
- C. Create the ENI, attach it to FortiGate, and then restart FortiGate.
- D. None, you cannot create and add additional ENIs to an existing FortiGate-VM.
Answer: A
NEW QUESTION 31
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guarddutyscript to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?
- A. WAF, Shield, GuardDuty, S3, and DynamoDB.
- B. GuardDuty, CloudWatch, S3, and DynamoDB.
- C. Inspector, Shield, GuardDuty, S3, and DynamoDB.
- D. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
Answer: D
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/ed901ad2-4424-11e9-
94bf-00505692583a/FortiOS_6.2.0_AWS_Cookbook.pdf
NEW QUESTION 32
You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?
- A. Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).
- B. Convert the c4.xlarge instances to m4.xlarge instances.
- C. Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.
- D. Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.
Answer: D
NEW QUESTION 33
Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)
- A. Multicast traffic is not allowed.
- B. Proxy ARP entries are disregarded.
- C. AWS DNS reserves the first host IP address of each subnet.
- D. 802.1q VLAN tags are allowed inside the same virtual private cloud.
Answer: A,C
NEW QUESTION 34
......
For more info read reference:
Fortinet NSE7_PBC-6.4 Certification Reference
Fortinet NSE7_PBC-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Dumps Brief Outline Of The NSE7_PBC-6.4 Exam: https://dumpsninja.surepassexams.com/NSE7_PBC-6.4-exam-bootcamp.html